Manufacturer, stockist and exporter, supplying worldwide from Mumbai, India yash@aerosteel.co.in+91 78748 73449WhatsApp

Overview

Socket weld and threaded fittings are forged for strength in small-bore piping, typically up to 4 inches. Socket weld ends give a leak-tight fillet-welded joint, while threaded ends allow quick assembly where welding is not permitted.

We supply them in the same grades as our flanges, so a small-bore package can be ordered in one place.

Socket Weld & Threaded Fittings supplied by Aero Steel Overseas

Types we supply

  • 90° and 45° elbows
  • Equal and reducing tees
  • Crosses
  • Full, half and reducing couplings
  • Caps and plugs
  • Unions
  • Swage nipples and hex nipples
  • Bushings
  • Weldolets, sockolets and threadolets

Specifications

Dimension standards
ASME B16.11, MSS SP-79, SP-83, SP-95, SP-97
Size range
1/8" NB to 4" NB
Pressure class
Socket weld: 3000, 6000, 9000. Threaded: 2000, 3000, 6000
Threads
NPT (ASME B1.20.1), BSPT, BSPP
Testing
PMI, dimensional, hardness
Documents
EN 10204 3.1 / 3.2 MTC, third-party inspection reports

Material grades

MaterialSpecificationGrades
Stainless steelASTM A182F304, F304L, F316, F316L, F321, F347, F904L
Duplex & super duplexASTM A182F51, F60, F53, F55
Nickel alloysASTM B564; B381 (titanium); A182 F44 (254 SMO)Monel 400, Inconel 600, Inconel 625, Incoloy 825, Hastelloy C276, Titanium Gr. 2, Titanium Gr. 7, 254 SMO
Alloy steelASTM A182F5, F9, F11, F22, F91
Carbon steelASTM A105 / A350A105, A350 LF2

Need a grade that is not listed? Ask our team; we source special grades from approved mills.

Inspection and certification

  • Mill test certificate: EN 10204 3.1 for complete material traceability; 3.2 on request.
  • Material testing: PMI, mechanical and chemical testing as per project requirements.
  • NDT: UT, RT, MPI and DPI through approved agencies.
  • Third-party inspection: TUV, SGS, BV, Lloyd's or your nominated agency.

Frequently asked questions

When should I choose socket weld over buttweld fittings?

Socket weld fittings suit small-bore lines, usually 2 inches and below, where they are quicker to fit. Buttweld fittings are preferred for larger sizes and where crevice corrosion or full radiography is a concern.

What does class 3000 or 6000 mean?

The class is a pressure designation in ASME B16.11 that matches the fitting wall to a pipe schedule. Class 3000 socket weld fittings correspond to Schedule 80 pipe, and class 6000 to Schedule 160.

Which threads do you supply?

NPT threads as standard, with BSPT and BSPP on request.

Send your enquiry and get a price with delivery

Share a drawing, bill of materials or just the grade and size. No minimum order quantity.

WhatsApp us
CallWhatsApp