Overview
Flanges are forged from certified billets and machined to the facing, bore and drilling of your specification. We supply ASME, EN 1092-1, DIN and JIS patterns, as well as flanges made to customer drawings.
Every flange is marked with grade, size, class and heat number for full traceability to the mill certificate.

Types we supply
- Weld neck flanges
- Slip-on flanges
- Blind flanges
- Socket weld flanges
- Threaded flanges
- Lap joint flanges
- Long weld neck flanges
- Orifice flanges
- Spectacle blinds, spades and spacers
- Reducing flanges
Specifications
- Dimension standards
- ASME B16.5 (1/2" to 24"), ASME B16.47 Series A & B (26" to 60"), ASME B16.36, EN 1092-1, DIN, JIS B2220
- Pressure class
- ASME Class 150, 300, 600, 900, 1500, 2500; PN 6 to PN 100
- Facing
- Raised face, flat face, ring type joint
- Finish
- Stock finish, serrated (125–250 AARH), smooth finish
- Testing
- PMI, UT, hardness, dimensional
- Documents
- EN 10204 3.1 / 3.2 MTC, third-party inspection reports
Material grades
| Material | Specification | Grades |
|---|---|---|
| Stainless steel | ASTM A182 | F304, F304L, F304H, F316, F316L, F317L, F321, F347, F904L |
| Duplex & super duplex | ASTM A182 | F51 (S31803), F60 (S32205), F53 (S32750), F55 (S32760) |
| Nickel alloys | ASTM B564; B381 (titanium F2, F7); A182 F44 (254 SMO) | Monel 400, Inconel 600, Inconel 625, Incoloy 800, Incoloy 825, Hastelloy C276, Titanium Gr. 2, Titanium Gr. 7, 254 SMO |
| Alloy steel | ASTM A182 | F5, F9, F11, F22, F91 |
| Carbon steel | ASTM A105 / A350 / A694 | A105, A350 LF2, A694 F42 to F70 |
Need a grade that is not listed? Ask our team; we source special grades from approved mills.
Inspection and certification
- Mill test certificate: EN 10204 3.1 for complete material traceability; 3.2 on request.
- Material testing: PMI, mechanical and chemical testing as per project requirements.
- NDT: UT, RT, MPI and DPI through approved agencies.
- Third-party inspection: TUV, SGS, BV, Lloyd's or your nominated agency.
Frequently asked questions
Which flange type should I use for high-pressure lines?
Weld neck flanges are the usual choice for high pressure and temperature, because the tapered hub transfers stress into the pipe. Slip-on flanges are easier to align and suit lower pressure service.
Do you supply EN 1092-1 flanges as well as ASME?
Yes. We supply EN 1092-1 PN-rated flanges, DIN and JIS patterns, and flanges machined to customer drawings.
What facing finish do you supply?
Raised face flanges are supplied with a serrated finish of 125–250 AARH as standard. Smooth or other finishes are available on request.

