Manufacturer, stockist and exporter, supplying worldwide from Mumbai, India yash@aerosteel.co.in+91 78748 73449WhatsApp

Quality, testing and certification

Every product from our plants at Kalamboli (Navi Mumbai) and Wada (Palghar) passes multi-stage inspection by a trained quality assurance and control team, so that only defect-free material reaches our customers.

Our testing facilities
Phased array ultrasonic testing of a stainless steel flanged spool at Aero Steel Overseas

Certified Quality & International Compliance

Our products meet globally recognised standards, ensuring reliability, traceability and performance. Copies of certificates are available on request.

  • ISO 14001:2015Environmental management system
  • ISO 9001:2015Quality management system
  • PED ApprovedPressure Equipment Directive 2014/68/EU
  • CE MarkingConformity for European markets
  • Third Party InspectionTUV, SGS, BV, Lloyd's on request
  • MTC 3.1 CertificationEN 10204 3.1 mill test certificates

In-house testing facilities

Our manufacturing plant is equipped to test high nickel alloys, stainless steel, duplex, carbon and alloy steel across nine areas of inspection.

Chemical testing

  • Spectro analysis (OES) Confirms the chemical composition of the material
  • Positive Material Identification (PMI) Verifies the grade before dispatch

Mechanical testing

  • Tensile test Ultimate tensile and yield strength
  • Hardness test Brinell, Rockwell or Vickers
  • Impact test (Charpy) Toughness at low temperature
  • Elongation test Ductility

Non-destructive testing (NDT)

  • Ultrasonic testing (UT) Detects internal defects
  • Radiography (RT / X-ray) Finds weld and internal flaws
  • Dye penetrant testing (PT) Detects surface cracks
  • Magnetic particle testing (MT) Surface and near-surface defects in ferrous material

Metallurgical testing

  • Microstructure examination
  • Grain size analysis
  • Ferrite content test Important for duplex and austenitic grades

Corrosion testing

  • Intergranular corrosion (IGC) test
  • Pitting resistance test
  • Salt spray test

Heat treatment verification

  • Solution annealing verification
  • Heat treatment record check

Dimensional and visual inspection

  • Dimensional check OD, ID, thickness, PCD and more
  • Visual inspection Surface finish and facing (RF, FF)

Pressure and leak testing

  • Hydrostatic test Especially fittings and flange assemblies
  • Pneumatic test

Documentation and certification

  • Mill test certificate EN 10204 3.1 / 3.2
  • Third-party inspection (TPI) BV, TUV, SGS and others
Positive material identification (PMI) of an Alloy 625 weld neck flange

Why we test

Test results are used to select the right material for an application, to control quality, and to predict how a material will behave under other types of loading.

Our impact testing machine measures a product's ability to resist high-rate loading. Hardness, IGC and PMI tests confirm that every product leaving the plant meets the specification.

From raw material to dispatch

  1. Raw material verificationChemistry and grade checked against the mill certificate before production.
  2. In-process inspectionChecks during forging, machining and heat treatment.
  3. Final inspection and testingDimensional, visual, mechanical and NDT as the specification requires.
  4. Documentation and packingEN 10204 3.1/3.2 certificates, TPI reports and seaworthy packing.

Standards we work to

  • ASME
  • ASTM
  • MSS SP
  • API
  • EN
  • DIN
  • JIS
  • IS
  • ISO
  • AWWA C207

Frequently asked questions

What is the difference between EN 10204 3.1 and 3.2 certificates?

A 3.1 certificate is issued by the manufacturer's inspection department, independent of production, and confirms the test results for the delivered material. A 3.2 certificate is also countersigned by an independent inspector, such as a third-party agency or the purchaser's representative.

Can my own inspector witness testing?

Yes. Third-party inspection by agencies such as BV, TUV and SGS, or by your nominated inspector, can be arranged before dispatch.

Which corrosion tests can you perform?

We carry out intergranular corrosion (IGC), pitting resistance and salt spray testing, as required by the material specification or your purchase order.

Do you test the grade of every material?

Material grade is verified by spectro analysis and Positive Material Identification (PMI) as part of our inspection process, and the results are recorded on the mill test certificate.

Send your enquiry and get a price with delivery

Share a drawing, bill of materials or just the grade and size. No minimum order quantity.

WhatsApp us
CallWhatsApp