Overview
We supply cold rolled sheets and coils, hot rolled plates and precision strips for tanks, pressure vessels, heat exchangers, cladding and general fabrication.
Material can be cut to size, sheared, slit or plasma cut to your drawing, and supplied with a protective PVC film on finished surfaces.

Types we supply
- Cold rolled sheets
- Hot rolled plates
- Coils and slit coils
- Strips and shims
- Chequered plates
- Perforated sheets
- Circles and cut-to-size blanks
Specifications
- Standards
- ASTM A240, A480, ASME SA240
- Thickness
- 0.1 mm to 100 mm (typical)
- Width
- Up to 2500 mm, or cut to size
- Surface finish
- No.1, 2B, BA, No.4, hairline, No.8 mirror
- Processing
- Cutting, shearing, slitting, plasma and laser cutting
- Documents
- EN 10204 3.1 / 3.2 MTC
Material grades
| Material | Specification | Grades |
|---|---|---|
| Stainless steel | ASTM A240 | 304, 304L, 304H, 309S, 310S, 316, 316L, 316Ti, 317L, 321, 347, 409, 410, 430, 904L |
| Duplex & super duplex | ASTM A240 | UNS S31803, S32205, S32750, S32760 |
| Nickel alloys | ASTM B127, B168, B443, B409, B424, B575; B265 (titanium); A240 (S31254) | Monel 400, Inconel 600, Inconel 625, Incoloy 800, Incoloy 825, Hastelloy C276, Titanium Gr. 2, Titanium Gr. 7, 254 SMO |
| Alloy steel | ASTM A387 | Grade 11, 22, 91 |
| Carbon steel | ASTM A516 / A36, IS 2062 | A516 Gr. 60/70, A36, IS 2062 |
Need a grade that is not listed? Ask our team; we source special grades from approved mills.
Inspection and certification
- Mill test certificate: EN 10204 3.1 for complete material traceability; 3.2 on request.
- Material testing: PMI, mechanical and chemical testing as per project requirements.
- NDT: UT, RT, MPI and DPI through approved agencies.
- Third-party inspection: TUV, SGS, BV, Lloyd's or your nominated agency.
Frequently asked questions
What is the difference between 2B and BA finish?
2B is a smooth, moderately reflective cold rolled finish used for most industrial applications. BA (bright annealed) is more reflective and is chosen where appearance or cleanability matters.
Can you cut plates to my drawing?
Yes. Plates and sheets can be sheared, plasma or laser cut to size, and coils can be slit to width.
Do you supply pressure vessel quality plate?
Yes. ASTM A240 / ASME SA240 stainless plates and A516 carbon steel plates are supplied with mill certificates for pressure vessel use.

