Overview
Buttweld fittings change direction, branch or reduce a pipeline while keeping the full strength of a welded joint. We supply them in the same grades as our pipes, so a complete spool package can be matched heat for heat.
Fittings are bevelled ready for welding, and wall thickness is matched to the pipe schedule you specify.

Types we supply
- 90° and 45° elbows (long and short radius)
- 180° return bends
- Equal and reducing tees
- Concentric and eccentric reducers
- Pipe caps
- Stub ends (long and short pattern)
- Equal and reducing crosses
- 3D and 5D long radius bends
Specifications
- Dimension standards
- ASME B16.9, ASME B16.28, MSS SP-43, MSS SP-75
- Size range
- 1/2" NB to 48" NB
- Wall thickness
- Schedule 5S to XXS, matched to pipe
- Construction
- Seamless and welded
- Ends
- Bevelled to ASME B16.25
- Testing
- PMI, dimensional, hardness, NDT on request
- Documents
- EN 10204 3.1 / 3.2 MTC, third-party inspection reports
Material grades
| Material | Specification | Grades |
|---|---|---|
| Stainless steel | ASTM A403 | WP304, 304L, 304H, 316, 316L, 317L, 321, 347, 904L |
| Duplex & super duplex | ASTM A815 | UNS S31803, S32205, S32750, S32760 |
| Nickel alloys | ASTM B366; B363 (titanium); A403 (S31254) | Monel 400, Inconel 600, Inconel 625, Incoloy 825, Hastelloy C276, Titanium Gr. 2, Titanium Gr. 7, 254 SMO |
| Alloy steel | ASTM A234 | WP5, WP9, WP11, WP22, WP91 |
| Carbon steel | ASTM A234 / A420 | WPB, WPC, WPL6 |
Need a grade that is not listed? Ask our team; we source special grades from approved mills.
Inspection and certification
- Mill test certificate: EN 10204 3.1 for complete material traceability; 3.2 on request.
- Material testing: PMI, mechanical and chemical testing as per project requirements.
- NDT: UT, RT, MPI and DPI through approved agencies.
- Third-party inspection: TUV, SGS, BV, Lloyd's or your nominated agency.
Frequently asked questions
What is the difference between long radius and short radius elbows?
A long radius elbow has a centre-to-face distance of 1.5 times the nominal pipe size, giving lower pressure drop. A short radius elbow uses 1.0 times the size and suits tight spaces.
Can you match fitting wall thickness to my pipe?
Yes. Fittings are supplied in the schedule of the connecting pipe, from 5S up to XXS.
Do you make bends to a custom radius?
Yes. 3D, 5D and other radii can be produced to your drawing.

