Overview
Aero Steel Overseas manufactures fasteners in stainless steel, high nickel alloys, duplex, alloy and carbon steel at its plants in Kalamboli (Navi Mumbai) and Wada (Palghar). Supplying flanges and the bolting for them from one source means the grades are matched and the documents arrive together.
Fasteners are made to ASTM, ASME, DIN and ISO standards or to customer drawings, with full heat traceability and EN 10204 3.1 certification.

Types we supply
- Stud bolts (fully threaded)
- Hex bolts and heavy hex bolts
- Heavy hex nuts
- Plain and spring washers
- Threaded rods
- U-bolts
- Anchor and foundation bolts
- Socket head cap screws
- Special fasteners to drawing
Specifications
- Standards
- ASTM A193, A194, A320, A453, F593, F594; ASME B18.2.1, B18.2.2; DIN 931, 933, 934; ISO 4014, 4017, 4032
- Size range
- M6 to M100; 1/4" to 4"
- Length
- As per drawing; stud bolts cut to flange class and size
- Threads
- UNC, UNF, 8UN, metric coarse and fine
- Coatings
- Plain, zinc plated, hot-dip galvanised, PTFE (Xylan) coated
- Testing
- Tensile, proof load, hardness, impact, PMI
- Documents
- EN 10204 3.1 / 3.2 MTC, third-party inspection reports
Material grades
| Material | Specification | Grades |
|---|---|---|
| Stainless steel | ASTM A193 / A194 / F593 | B8, B8M, B8T (304, 316, 321) bolts; 8, 8M nuts; 304, 316, 310, 904L |
| Duplex & super duplex | ASTM A276 / A479 bar-based | UNS S31803, S32205, S32750, S32760 |
| Nickel alloys | ASTM B164, B166, B446, B574, B637; B348 (titanium); A276 (S31254) | Monel 400, Monel K500, Inconel 600, Inconel 625, Inconel 718, Hastelloy C276, Alloy 20, Titanium Gr. 2, Titanium Gr. 7, 254 SMO |
| Alloy steel | ASTM A193 / A194 / A320 / A453 | B7, B7M, B16 bolts; 2H, 2HM, 4, 7 nuts; L7, L43; A453 Gr. 660 |
| Carbon steel | ASTM A307 / A194 | A307 Gr. B bolts, 2H nuts, structural bolting |
Need a grade that is not listed? Ask our team; we source special grades from approved mills.
Inspection and certification
- Mill test certificate: EN 10204 3.1 for complete material traceability; 3.2 on request.
- Material testing: PMI, mechanical and chemical testing as per project requirements.
- NDT: UT, RT, MPI and DPI through approved agencies.
- Third-party inspection: TUV, SGS, BV, Lloyd's or your nominated agency.
Frequently asked questions
Which stud bolts go with A105 or F316L flanges?
Carbon steel A105 flanges in normal service usually use ASTM A193 B7 stud bolts with A194 2H nuts. Stainless steel flanges such as F316L usually use A193 B8M studs with A194 8M nuts. Your piping specification may call for something different, so we follow it.
Do you supply PTFE (Xylan) coated bolts?
Yes. PTFE coating protects alloy steel fasteners from corrosion and makes disassembly easier. Hot-dip galvanising and zinc plating are also available.
Can you make special fasteners to my drawing?
Yes. We manufacture fasteners to customer drawings in all the grades we supply, including nickel alloys and duplex.

